|
 Thousands of Gallons of perfect water for
Only $49.95
You will be redirected to our secure sales server for purchase
or call 877-492-8123 to order.
 Solves most outdoor water problems by reducing or eliminating:
- Dissolved Heavy Metals (including lead and mercury)
- Lime / Scale
- Organic Contaminants and pesticides
- Hydrogen Sulfide (rotten egg smell)
- Chlorine
... and thousands of other toxic and harmful contaminants!
Instruction for Use:
--- Flush garden hose before use to remove sediment and contaminants.
-- Attach filter to hose and flush for one minute until water runs clear.
-- Can be used effectively at either end of the garden hose. Can be used with a sprayer attachment or sprinkler with a barely noticeable reduction in flow rate.
 -- Save end caps for storage. STORE WET! (do not allow filter to dry out as the media will harden and become ineffective - if end caps are lost, store in a plastic baggy in refrigerator)
-- Works best with a flow rate of 2GPM or less. For highly contaminated water, reduce flow rate to 1GPM
-- If flow rate slows, back-flush filter to remove sediment buildup. If it’ not possible to back-flush filter, place female end in a bucket of clean water and shake to loosen blockage from media.
Test Hose Filter for exhaustion: attach the unit to a source of chlorinated water and test the output with a chlorine test strip, readily available at any pool and spa supply store. Chlorine level should read at or near 0. Your Hose Filter will last between 8,000 and 40,000 gallons, depending on care, use and and initial water contamination.
RECYCLE! Return your Hose Filter to Pacific Sands for recycling for a $10 rebate coupon good for any of our products at www.ecoone.biz.
 Product Support:
Pacific Sands, Inc.
Toll Free: 877-492-8123
www.pacificsandsinc.com
email: Todd.Taylor@pacificsandsinc.com
(not intended to treat non-potable water)
|
